Champions League

iPhone 6s screen replacement,Champions League new visual experience! iPhone 6s is an early iPhone, but it still won the choice of many users.However, due to the longer use time, the screen of the iPhone 6s will inevitably have various problems, such as damage, fragmentation, deformation, etc., which will seriously affect the user experience of the mobile phone. Therefore, here we will introduce how to replace the screen of iPhone 6s to bring you a new visual experience. First of all, we need to prepare the following tools: 1. iPhone 6s screen replacement kit 2. Suction cup 3. Triangle hard card 4. Small pull-out tablet 5. Clip 6. Screwdriver Step 1: Backing up mobile phone data data backup is a very important step. When replacing the iPhone 6s screen, there may be unexpected situations, resulting in data loss. Therefore, be sure to back up the data in the mobile phone before replacing.Backups can be made through iCloud or iTunes, and the specific method can be checked on Apple's official website. Step 2: Remove the mobile phone case and unscrew the side screws of the iPhone 6s, and then use the suction cup to absorb the middle of the upper frame of the screen. Use the triangular hard card to slowly scrape off the adhesive film between the screen and the mobile phone shell, and be careful not to damage the speaker, Home button and other devices. Use a small pullout to remove the connection line on the camera tray to connect the cable. Remove the connection line on the battery connection board, so that the rear panel of the fuselage can be safely removed. Step 3: Remove the original screen. Be very careful when removing the screen. If it is not operated properly, it is easy to damage other parts of the mobile phone. First, fix the adhesive film along the frame with a guide clip, and then gently pull out the screen connection chip.Unscrew the screws of all devices, disassemble the camera, sensor cable, speaker cable and home button cable, and advise you to remove the headphone jack and screen LCD membrane connector when using the new screen to replace the plug on the new screen. Step 4: Replace the new screen and fix the headphones of the new screen and the screen LCD membrane connector to the old plug. Install a new screen by repeating the order of the operation just now. Be very careful when installing a new screen and don't use too much force to avoid damaging the screen connection points and other devices. Step 5: Test the new screen. After installing the new screen, we need to test whether the new screen can work properly. At this time, connect the mobile phone with the battery board cable, turn on the mobile phone and test the screen. If the screen display is normal, you can reinstall the rear panel of the fuselage and tighten the screws.Summary: Replacing the screen of iPhone 6s requires certain skills and experience. If you are not familiar with the process, you'd better go to a specialized repair shop to do this job. If you accidentally damage other devices, the consequences will be unimaginable. Before the screen is replaced, we also hope that you can back up and protect your data. Finally, replacing the screen of iPhone 6s can bring a new visual experience. The new screen can make your mobile phone look new and make it more enjoyable to use. However, please be sure to pay attention to safety and avoid using excessive force during operation.

Contact Us
Phone：020-83484668