Walletinvestor digi plus

List of the catalogue of this article:

• 1,Walletinvestor digi plus The production process of a waste into a treasure car
• 2. Carton MakingCar tutorial
• 3, The production method of handmade cars

The process of making waste into treasure cars

1. The steps for making cars by hand are as follows: Let me teach you how to turn waste into treasure and use waste teeth In fact, the method of making a car by hand in a paste box is very simple. Prepare materials: toothpaste box, four bottle caps, rubber clay, double-sided glue, straw.

2. Handmade smallHow to make a car: Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage, and the other end into a car head, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife.

3. The first step is to prepare the necessary equipment. Step two, cut the toothpaste box into the picture. Step three. Use double-sided adhesive to fix it. The fixed appearance is as shown in the figure. Step 4. Use excess pieces of paper to make the head and tail of the car.

4. Then glue the front face of the prepared car to the end of the toilet paper tube with glue, and trim the uneven part with scissors. Then glue the car seat, steering wheel and front wheel with glue. The last step is to stick the rear wheel, and our handmade car is completed. About handmade: turn waste into treasure, handmade.

5. Leave one side of the narrow edge of the carton, and then seal it with wide tape. Cut open about two-thirds of the sealing surface and turn out a piece of cardboard. Then fold the two pieces of cardboard in bal. Make the wheels and steering wheels of the car with disposable lunch boxes. Remember to color them first. Make the eyes and mouth of the car with white card paper.

Carton making tutorial

1. The carton making tutorial is as follows: Prepare the necessary materials: toothpaste box, four small bottle caps, double-sided glue, scissors, rubber clay, straw. Cut the toothpaste box according to the picture below, and pay attention to the same size on the left and right sides.

2. Prepare the required materials. Cut off one side of the toothpaste box,Cut out a triangular notch in the toothpaste box as shown in the picture below (as shown in the figure), and note that the left and right sides should be the same size. Stick the edge of the upper piece with double-sided adhesive, fold it down, and stick it tightly.

3. First, seal the carton with wide tape, and then cut it at two-thirds of the seal. Turn out a piece of cardboard as the windshield of the car. Make 4 wheels out of paper and fix them on both sides of the carton. After fixing the number wheel, just color the body of the car.

4. Flatten the cardboard box and cut it out according to the shape proportion shown in the figure. Stick the parts well. This is the main body of the car. Color drawing, decoration, headlights and windows are all complete. To make a wheel, the wheel rim is black, black tape or painting is also fe, in short, it should be realistic.

5. Use cardboard boxes to make cars. First, prepare cardboard boxes, scissors, colored pencils, glue sticks and white paper.02 First, use scissors to cut out the piece of the cardboard box that needs to be made into a car. 03 Use scissors to cut off a small triangle on each side of the opening of the carton.

6. The tutorial of making a small car with a handmade carton is as follows: to make a small car with a cardboard box, first prepare the cardboard box, scissors, colored pencils, glue sticks and white paper. First, cut out the cardboard box with scissors that needs to be made into a car. Use scissors to cut off a small triangle on each side of the opening of the carton.

How to make a handmade car

Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage and the other end into the front of the car, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife. Fold it and stick it with double-sided adhesive and transparent adhesive, so that the front of the car will come out.

First of all, prepare the materials and tools for making toy cars: a pair of scissors, a piece of colored paper, a roll of paper tube, and glue or double-sided adhesive. In addition, four bottle caps of beverage bottles are needed. Bottle caps can be of different colors, but the size must be the same, otherwise the toy car is easy to overturn.

First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure. Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.

The simple way to make a car by hand is as follows: material preparation: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.