DigiPlus

The DigiPlusengine is one of the most important parts of a vehicle, and its safety and reliability directly determine the performance and service life of the vehicle. Engine inspection is one of the important steps to keep the engine working normally. It can help detect and solve potential problems and extend the service life of the engine. This article will introduce how to conduct engine testing and provide some useful tips and suggestions. First of all, before testing the engine, it should be ensured that the vehicle is parked in a flat and open area, and the engine cooling time is not less than 30 minutes. This can ensure that the engine parts are fully cooled to prevent injury.The first step is to open the hood of the car. Check the level of engine oil to make sure it is within the recommended range. If the level of engine oil is too low, the correct brand of oil must be added to prevent oil overheating and engine failure. At the same time, check the cleanliness of the oil. If you find that the oil is black, foamy, oxidized or contaminated, it means that the oil needs to be replaced. Check whether the engine charging system is working properly. Check the positive and negative poles of the engine battery for signs of corrosion or loosening. If corrosion or oxidation is found, the contact part of the battery should be cleaned to ensure the effective transmission of electrical energy. In addition, it is also necessary to check whether the generator is working normally. Test the generator belt tensioner. If it is loose, it will lead to problems such as insufficient battery charge, accidents and high electricity costs. Check the brake system of the engine.Squeeze the brake pedal to check whether the degree of contact between the pedal and the brake pad is consistent. If the brake pads are excessively worn or damaged, it will lead to problems such as brake failure, brake failure, and increased brake distance. Next, check the cooling system of the pump and cooler of the engine. Check whether there are signs of leakage around the pump. If so, the water pump needs to be replaced. At the same time, the external level of the engine cooler should also be cleaned. Check the cooler for excessive oil, sediment or other oxides, which may affect the cooling effect, causing the engine to overheat or cause failure. Finally, check the transmission system of the engine. The starter and engine are driven by gears, which will push out gear belts and test whether they are uniform, which helps prevent gear wear and loss of gears. In addition, it is best to check the engine and transmission of the engine for excessive oil or leakage.In a word, engine testing is one of the important steps to maintain the safety of your car and extend the life of the engine. When conducting engine inspection, it is necessary to prepare for work and pay attention to details, check the engine oil level, charging system, braking system, cooling system and transmission system and other aspects, find and solve problems in time, and ensure the safe and reliable use of the vehicle.

Contact Us
Phone：020-83484668