DigiPlus

List of the contents of this article:

• 1, How to install gpt on the computerT
• 2, How to solve the failure of GPT one-click installation of win7 system
• 3. When installing the Win10 system, it prompts how to handle the installation in the GPT partition
• 4,< A href='#When installing the system, encounter "The selected disk takes the form of GPT partition"' title='When installing the system, encounter "The selected disk takes the form of GPT partition"'>When installing the system, "The selected disk takes the form of GPT partition"
• 5, What is the gpt partition and how to reinstall the system

How to install gpt on the computer< /h2>

Step1: Turn on UEFI mode in BIOS and turn off Legacy mode. If your computer is in Legacy mode, you must switch to UEFI mode. You can find this setting in the BIOS settings. Step 2: Start UEFI mode during the Windows installation process. You can complete the Windows installation process by following the prompts.

Hardware requirements: First, make sure that your computer has the hardware requirements to run the GPT model.This usually requires a powerful GPU (graphics processor) or TPU (tensor processor), as well as enough memory and storage space. Programming environment: You need to set up a programming environment to run GPT.

Press the shortcut key DEL or F12 to enter the bios interface, select the boot tab, and the first line is changed to UEFI boot return. The keyboard shortcut F10 save has been launched, and the system will enter the Windows installation interface as shown in the figure below. Press and hold the shift key and the F10 key on the keyboard again to enter the cmd command line program.

GPT one-click installation win7 system failure solution

1. Now let's share with you the solution to the GPT one-click installation win7 system failure. After restarting the computer, press F2 to open the BIOS settings (each brand of computer may be different, which can be inquired online). Find the Secure Boot security startup item in the BIOS settings and set it to Disabled.

2、If you still can't install win7 and DigiPlusthe following prompt appears, it is because the previous boot file was not rewritten normally.

3. First of all, it is possible that there is an error in the windows installation configuration, resulting in the failure of the windows system installation, and this configuration will be affected by the current running program. Therefore, you can restart the computer and re-run the win7 system installer. 2 Secondly, if the above If the method is invalid, then you need to configure the system with the command line parameters.

4. Now let me share with you the specific solution to the uefi gpt installation win7 system stuck on the startup page.

5. Use Win7 CD or USB flash drive to boot and enter the system installation interface. When installing the system, "WindowsThis disk cannot be installed, and the selected disk is in the form of GPT partition. The solution is as follows: In the powerless installation steps prompted by the system, press "Shift+F10" and exhale the "CMD" command, that is, the small black window.

Press the shortcut key DEL or F12 to enter the bios interface, select the boot tab, and the first line is changed to UEFI boot return. The keyboard shortcut F10 save has been launched, and the system will enter the Windows installation interface as shown in the figure below. Press and hold the shift key and the F10 key on the keyboard again to enter the cmd command line program.

When installing the system, "the selected disk is in the form of GPT partition"

1. However, the GPT partition form requires the EFI support of the motherboard when reinstalling the system, so it leads to the appearance of The situation of the face. Therefore, the solution is to convert the partition form to the MBR partition form.

2. When using Legacy boot, the disk partition table must be in MBR format, otherwise it will prompt "The selected disk adopts FPT partition format and cannot be installed". Solution 1: Modify the GPT disk partition table to MBR disk partition table.

3. Enter select disk 1 and press Enter. Note: Here is the disk selection and the selected disk wants to install the system, but it prompts the error "The selected disk adopts the GPT partition form". Enter clean and press Enter. This command is to delete all the partitions on the modified disk.

4. When installing the system, it appears that "windows cannot be installed to this disk, and the selected disk adopts GPT partition.The solution is as follows: In the step when the system prompts that it cannot be installed, press and hold "shift+f10" and call out the "cmd" command symbol, that is, a small black window.

What is the gpt partition and how to reinstall the system

GPT partition mode uses the GUID partition table, which is a newer disk partition table structure standard derived from the EFI standard. Compared with the commonly used Master Boot Record (MBR) partition scheme, GPT provides a more flexible disk partitioning mechanism.

First, enter the "Startup" tab of the BIOS and set the "Compatibility Module" to "Open" first. Then change "Boot Mode" to "Legacy" to protectSave the BIOS to exit and restart, and then press F12 to enter the boot device menu. Theoretically, you can see the USB flash drive option with the system installed at this time.

The difference between MBR partition and GPT partition is that MBR only supports up to 4 main partitions, while GPT can support 128 main partitions. However, the GPT partition form requires the EFI support of the motherboard when reinstalling the system, which leads to the above situation. Therefore, the solution is to convert the partition form to the MBR partition form.

Table, abbreviated as GPT) refers to the globally uniquely marked disk partition table format. It is part of the Scalable Firmware Interface (EFI) standard (used by Intel to replace the BIOS of personal computers), which is used to replace the BIOS system with 32bits to store the master boot record (MBR) partition table of logical block address and size information.

GPT is a standard for the structural layout of the partition table of a solid hard disk. It is part of the Scalable Firmware Interface (EFI) standard (used by Intel to replace the BIOS of personal computers), which is used to replace the master boot record (MBR) partition table of 64bits in the BIOS system to store logical block address and size information.