Walletinvestor digi plus

How to deal with the sudden slowdown of the vehicle due to sudden braking caused by engine failure) Driving is Walletinvestor digi plusa very convenient way to travel, but driving also means that you need to follow the traffic Rules and maintaining the safety of vehicles.However, when engine failure, stuttering and other problems occur during driving, it will pose a threat to the life and property safety of the driver and passengers. So, what should I do if the engine fails? I. When there is a jerk when we find that the engine has a sense of jerk in the process of driving the vehicle, we should calm down and guide the traffic under the condition of ensuring that the vehicle is still in the driving state at this time. At this time, the most important thing is to avoid panic, slow down the car, and drive as far away from the lane as possible. While ensuring that the vehicle will not cause an accident between the front and rear vehicles due to emergency stop and other operations, use brake lights, turn signals and other devices to quickly send a signal to the rear vehicle that "there is an accident and needs attention". II. Avoid stepping on the brake. When the engine is stuttering, it will generallyMany drivers will choose to brake quickly to stop, but doing so actually makes the accident more dangerous. Because when dredging traffic, once the vehicle is stopped urgently, it is likely to cause the vehicle to lose control when the emergency brakes. At this time, if the vehicle drives too fast, it is easy to have a rear-end accident. Therefore, when the engine is found to fail, braking is not the only option. We can also choose other methods, such as releasing the clutch. III. Release the clutch. If the engine fails while the vehicle is running, the idle state of the car should be switched to the clutch state at this time, so as to avoid more damage caused by the engine thrust by pulling the clutch. At the same time, switching the vehicle to the clutch state can keep the vehicle at a certain speed when driving, so that the vehicle is more stable. Four, switch to the safe area. After engine failure, stuttering, etc., we must drive the vehicle to the safe area as soon as possible. Driving to a safe area usually means driving the vehicle to the side of the road and leaving the lane. At the same time, in order to avoid collisions with other cars on the road, we should also turn on the danger alarm flash and sound the horn loudly to attract the attention of the vehicles in front of us, so as to avoid the emergency braking operation of the car in front. It's better to drive into the side of the road and stop as soon as possible to wait for rescue or deal with the accident. In a word, you should not panic when you encounter a vehicle engine failure. If you are in a traffic section, you should decide which direction to drive the vehicle according to the traffic rules and the distance between the front cars. At the same time, you should maintain the speed and step on the brakes, flash lights and other devices appropriately. If the vehicle is not in the traffic section, you should drive the vehicle to a safe area at your own will to wait for the repair or rescue vehicle.Especially during the driving process, you should always pay attention to the operation status of the engine, and repair it in time when abnormal phenomena are found to ensure driving safety.

Contact Us
Phone：020-83484668