Hearthstone arena

List of the table of contents of this article:

• 1,How to make a pe system USB disk
• 2, How to make a pe boot USB flash drive | How to make a USB disk into a pe boot USB disk
• 3, How to make a USB boot disk?
• 4、 How to make a USB disk pe boot disk?

How to make a pe system USB disk

1. Search on the Internet and download the old Maotao USB disk startup disk making software or cabbage and other actual production software, and unzip it into the computer. Double-click the icon of the "Lao Maotao USB Disk Tool V2013 Super Installed Version" file to run the software. Double-click "LaoMaoTao.exe", file icon, and run this file.

2. Insert the USB flash drive into the computer, open the production tool, and select the production system, as shown in the figure below.Select the system that needs to be installed, click the check, and click Next, as shown in the figure below. Wait for the tool to download the system image and make PE, as shown in the figure below.

3. Click the yellow file mark in the upper left corner to open the file and open the location of the mirror image we saved before. And plug in the USB flash drive on the computer and click [Open] to see [Start] - [Write to Hard Disk Image] After clicking, the write dialog box will appear.

4. Method 1: Download the general PE toolbox V0 Winiso mirror file. Supplement: This version is an optimized version, and all tools are de-advertising. In addition, the English tools have been Sinicized, and the total size is only 110M.

5. Steps to make a PE disk: To make a PE disk, you need to use a bootable USB disk and a PE disk making tool.The following are the steps to make a PE disk: prepare a USB flash drive of at least 8GB in size to ensure that the USB flash drive can be booted (speed above USB0, supporting FAT32 file system).

6. Related tutorials: local hard disk one-click installation ghostxp/win7/win8/win10 system method recommended required tools: 8G or more large capacity USB disk, recommended 16Gpe boot usb disk production tool download: fat claw installation master production pe boot usb disk production The steps are as follows. First, download the system that needs to be installed.

How to make a pe boot USB flash drive | How to make a u disk a pe boot USB flash drive

Insload the system image iso file into the made USB boot disk;(2) Restart the computer and enter the USB disk startup screen (1 is the computer starts by itself, and 234 is entered into the USB disk startup); (3) After entering the pe tool, the system will automatically pop out of the pe installation tool and identify the system image file in the USB disk. Just click OK.

2 Open your system image file. It's the one that needs to be downloaded from Microsoft's official website when preparing for work. 3 Click to start---write the hard disk image 4 Select your USB flash drive in the hard drive. 5 Click Write to start the production. 6 Wait patiently: 7 Success, you now have a USB version of the system disk.

Download the PE production tool on the computer that needs to be installed. The following is a demonstration of U startup.

Related tutorials: one-click installation of local hard disk gHostxp/win7/win8/win10 system method recommended required tools: 8G or larger capacity USB disk, recommended 16Gpe boot USB disk production tool download: Fat Claw Installation Master production pe boot USB disk production steps are as follows. First, download the system that needs to be installed.

Insert the USB flash drive into the computer, open the production tool, and select the production system, as shown in the figure below. Select the system that needs to be installed, click the check, and click Next, as shown in the figure below. Wait for the tool to download the system image and make PE, as shown in the figure below.

When you open the Explorer, you can see that the name of the USB disk has become a cabbage USB disk; if there is an operating system iso file, it can be copied directly to any directory of the USB disk, generally placed in the GHO directory. The method of making peU disk isThat's it. The production method is very simple. You only need to download the peU disk production tool to complete the production with one click.

How to make a USB boot disk?

1. Start - Write to the hard disk image After clicking, the write dialog box appears. Red box 1 shows that the inserted USB disk has been in place. Press write to start making the Windows 10 boot disk. Once again, the data in the USB disk will be emptied. If it has been backed up, continue to write until the writing is completed, so that the Windows 10 boot disk is completed.

2. Preparation first of all, a computer and a USB flash drive are needed, preferably empty. If it is not empty, you need to back up or copy the data in the USB flash drive.In addition, you need to download a USB flash drive startup software. You can open the web page to search and start the USB disk making tool, and choose a software that suits you to download.

3, 1 Open the software and plug in your USB flash drive 2 Open your system image file. It's the one that needs to be downloaded from Microsoft's official website when preparing for work. 3 Click to start---write the hard disk image 4 Select your USB flash drive in the hard drive. 5 Click Write to start the production.

4. First, turn on the computer. When the boot page pops up, press "F1" to enter the BIOS settings. After entering the BIOS, use the arrow keys and the return key to operate. Under the Boot menu (sometimes in other menus such as Security), change Secure Boot to Disabled (indicating that the security boot is disabled).

5. Make a u boot disk on a computer that can access the Internet normally, and then download a system image to install it.

How to make a USB disk pe boot disk?

1. Start - Write to the hard disk image After clicking, the write dialog box appears. Red box 1 shows that the inserted USB disk has been in place. Press write to start making the Windows 10 boot disk. Once again, the data in the USB disk will be emptied. If it has been backed up, continue to write until the writing is completed, so that the Windows 10 boot disk is completed.

2. Install the system mirror iso file into the made USB disk boot disk; (2) Restart the computer and enter the USB disk boot screen (1 is the computer starts by itself, and 234 is to enter the USB disk startup);(3) After entering the pe tool, the system will automatically jump out of the pe installation tool and recognize the system image file in the USB flash drive. Just click OK.

3, 1 Open the software and plug in your USB flash drive 2 Open your system image file. It's the one that needs to be downloaded from Microsoft's official website when preparing for work. 3 Click to start---write the hard disk image 4 Select your USB flash drive in the hard drive. 5 Click Write to start the production.